Multi-Wavelength Technology
Williamson is the only company that offers two types of multi-wavelength pyrometers. The MW and MWx pyrometers are used to measure the temperature of non-greybody materials. These are materials for which the emissivity not only varies, but varies differently at different wavelengths.
Williamson’s multi-wavelength pyrometers use application specific algorithms to characterize infrared energy and emissivity to accurately calculate the temperature of these complex non-greybody materials. Algorithms have been developed and refined from extensive data collected from off-line simulations and on-line trials. These pyrometers also have a real-time measure of emissivity, confirming valid temperature measurement conditions and alerting you of invalid conditions that require troubleshooting.
Typical Non-Greybody Materials
- Aluminum
- Magnesium
- Stainless Steel
- Brass
- Bronze
- Copper
- Zinc
- Changes in alloy, surface texture, surface oxidation
- Abnormal operating conditions such as a furnace leak, bad roll, or reheated coil (Annealing Line)
The most common applications involve aluminum, steel, and copper. Each MW pyrometer can hold up to eight selectable algorithms so that the same sensor can be used for multiple applications.
The MWx pyrometers work differently than traditional MW technology which assumes that the surface conditions are relatively consistent. The MWx sensors use Dynamic ESP Technology to automatically compensate for more significant variation in surface character and conditions without any adjustments. The two applications which require the more advanced MWx technology are:
- Aluminum hot rolling mills where the surface character of the aluminum varies dramatically by alloy and pass as it goes through the reversing mill.
- High temperature (<900°F/480°C) aluminum billets where there is an elemental migration of aluminum to the outside billet surface that dramatically changes the emissivity of the billet surface.
Pro Series Products
The Pro Series is Williamson’s signature line of pyrometers which has been designed specifically for demanding industrial applications. It includes
Accurate Measurements Without Adjustments on Non-Greybody Materials
Some materials can be difficult or near impossible to measure with precision using single-wavelength or ratio pyrometers because their emissivity varies with wavelength. There are a variety of applications involving aluminum, steel, copper, zinc, and other non-greybody materials where multi-wavelength pyrometers are required to compensate for these complex emissivity characteristics.
Popular Multi-Wavelength Applications
Aluminum & Copper
Steel & Zinc
- Annealing Line
- Hot Dip Line
- Tubes
- Shot Blasted Tubes
- Zinc Coated Steel
- Steel Bearings
Other
- Glass Mold Plunger
- Magnesium Strip
Options & Accessories
AP – Air Purge
SB – Swivel Bracket
PCJ – Protective Cooling Jacket
IM – Interface Module
WC – Water Cooling Plate
Consult with one of Williamson’s Temperature Experts
We would love to discuss your temperature measurement application with you.
